(* $Id$ *)

 theory Presentation

 imports Pure

 begin

 chapter {* Presenting theories \label{ch:present} *}

 text {*

   Isabelle provides several ways to present the outcome of formal

   developments, including WWW-based browsable libraries or actual

   printable documents.  Presentation is centered around the concept of

   \emph{logic sessions}.  The global session structure is that of a

   tree, with Isabelle Pure at its root, further object-logics derived

   (e.g.\ HOLCF from HOL, and HOL from Pure), and application sessions

   in leaf positions (usually without a separate image).

   The Isabelle tools @{tool_ref mkdir} and @{tool_ref make} provide

   the primary means for managing Isabelle sessions, including proper

   setup for presentation.  Here the @{tool_ref usedir} tool takes care

   to let @{executable_ref "isabelle-process"} process run any

   additional stages required for document preparation, notably the

   tools @{tool_ref document} and @{tool_ref latex}.  The complete tool

   chain for managing batch-mode Isabelle sessions is illustrated in

   \figref{fig:session-tools}.

   \begin{figure}[htbp]

   \begin{center}

   \begin{tabular}{lp{0.6\textwidth}}

       @{verbatim isabelle} @{tool_ref mkdir} & invoked once by the user

       to create the initial source setup (common @{verbatim

       IsaMakefile} plus a single session directory); \\

       @{verbatim isabelle} @{tool make} & invoked repeatedly by the

       user to keep session output up-to-date (HTML, documents etc.); \\

       @{verbatim isabelle} @{tool usedir} & part of the standard

       @{verbatim IsaMakefile} entry of a session; \\

       @{executable "isabelle-process"} & run through @{verbatim

       isabelle} @{tool_ref usedir}; \\

       @{verbatim isabelle} @{tool_ref document} & run by the Isabelle

       process if document preparation is enabled; \\

       @{verbatim isabelle} @{tool_ref latex} & universal {\LaTeX} tool

       wrapper invoked multiple times by @{verbatim isabelle} @{tool_ref

       document}; also useful for manual experiments; \\

   \end{tabular}

   \caption{The tool chain of Isabelle session presentation} \label{fig:session-tools}

   \end{center}

   \end{figure}

 *}

 section {* Generating theory browser information \label{sec:info} *}

 text {*

   \index{theory browsing information|bold}

   As a side-effect of running a logic sessions, Isabelle is able to

   generate theory browsing information, including HTML documents that

   show a theory's definition, the theorems proved in its ML file and

   the relationship with its ancestors and descendants.  Besides the

   HTML file that is generated for every theory, Isabelle stores links

   to all theories in an index file. These indexes are linked with

   other indexes to represent the overall tree structure of logic

   sessions.

   Isabelle also generates graph files that represent the theory

   hierarchy of a logic.  There is a graph browser Java applet embedded

   in the generated HTML pages, and also a stand-alone application that

   allows browsing theory graphs without having to start a WWW client

   first.  The latter version also includes features such as generating

   Postscript files, which are not available in the applet version.

   See \secref{sec:browse} for further information.

   \medskip

   The easiest way to let Isabelle generate theory browsing information

   for existing sessions is to append ``@{verbatim "-i true"}'' to the

   @{setting_ref ISABELLE_USEDIR_OPTIONS} before invoking @{verbatim

   isabelle} @{tool make} (or @{"file" "$ISABELLE_HOME/build"}).  For

   example, add something like this to your Isabelle settings file

 \begin{ttbox}

 ISABELLE_USEDIR_OPTIONS="-i true"

 \end{ttbox}

   and then change into the @{"file" "~~/src/FOL"} directory and run

   @{verbatim isabelle} @{tool make}, or even @{verbatim isabelle} @{tool

   make}~@{verbatim all}.  The presentation output will appear in

   @{verbatim "ISABELLE_BROWSER_INFO/FOL"}, which usually refers to

   @{verbatim "~/.isabelle/browser_info/FOL"}.  Note that option

   @{verbatim "-v true"} will make the internal runs of @{tool usedir}

   more explicit about such details.

   Many standard Isabelle sessions (such as @{"file" "~~/src/HOL/ex"})

   also provide actual printable documents.  These are prepared

   automatically as well if enabled like this, using the @{verbatim

   "-d"} option

 \begin{ttbox}

 ISABELLE_USEDIR_OPTIONS="-i true -d dvi"

 \end{ttbox}

   Enabling options @{verbatim "-i"} and @{verbatim "-d"}

   simultaneously as shown above causes an appropriate ``document''

   link to be included in the HTML index.  Documents (or raw document

   sources) may be generated independently of browser information as

   well, see \secref{sec:tool-document} for further details.

   \bigskip The theory browsing information is stored in a

   sub-directory directory determined by the @{setting_ref

   ISABELLE_BROWSER_INFO} setting plus a prefix corresponding to the

   session identifier (according to the tree structure of sub-sessions

   by default).  A complete WWW view of all standard object-logics and

   examples of the Isabelle distribution is available at the usual

   Isabelle sites:

   \begin{center}\small

   \begin{tabular}{l}

     \url{http://isabelle.in.tum.de/dist/library/} \\

     \url{http://www.cl.cam.ac.uk/research/hvg/Isabelle/dist/library/} \\

     \url{http://mirror.cse.unsw.edu.au/pub/isabelle/dist/library/} \\

   \end{tabular}

   \end{center}

   \medskip In order to present your own theories on the web, simply

   copy the corresponding subdirectory from @{setting

   ISABELLE_BROWSER_INFO} to your WWW server, having generated browser

   info like this:

 \begin{ttbox}

 isabelle usedir -i true HOL Foo

 \end{ttbox}

   This assumes that directory @{verbatim Foo} contains some @{verbatim

   ROOT.ML} file to load all your theories, and HOL is your parent

   logic image (@{verbatim isabelle} @{tool_ref mkdir} assists in

   setting up Isabelle session directories.  Theory browser information

   for HOL should have been generated already beforehand.

   Alternatively, one may specify an external link to an existing body

   of HTML data by giving @{tool usedir} a @{verbatim "-P"} option like

   this:

 \begin{ttbox}

 isabelle usedir -i true -P http://isabelle.in.tum.de/library/ HOL Foo

 \end{ttbox}

   \medskip For production use, the @{tool usedir} tool is usually

   invoked in an appropriate @{verbatim IsaMakefile}, via the Isabelle

   @{tool make} tool.  There is a separate @{tool mkdir} tool to

   provide easy setup of all this, with only minimal manual editing

   required.

 \begin{ttbox}

 isabelle mkdir HOL Foo && isabelle make

 \end{ttbox}

   See \secref{sec:tool-mkdir} for more information on preparing

   Isabelle session directories, including the setup for documents.

 *}

 section {* Browsing theory graphs \label{sec:browse} *}

 text {*

   \index{theory graph browser|bold} 

   The Isabelle graph browser is a general tool for visualizing

   dependency graphs.  Certain nodes of the graph (i.e.~theories) can

   be grouped together in ``directories'', whose contents may be

   hidden, thus enabling the user to collapse irrelevant portions of

   information.  The browser is written in Java, it can be used both as

   a stand-alone application and as an applet.  Note that the option

   @{verbatim "-g"} of @{verbatim isabelle} @{tool_ref usedir} creates

   graph presentations in batch mode for inclusion in session

   documents.

 *}

 subsection {* Invoking the graph browser *}

 text {*

   The stand-alone version of the graph browser is wrapped up as an

   Isabelle tool called @{tool_def browser}:

 \begin{ttbox}

 Usage: browser [OPTIONS] [GRAPHFILE]

   Options are:

     -c           cleanup -- remove GRAPHFILE after use

     -o FILE      output to FILE (ps, eps, pdf)

 \end{ttbox}

   When no filename is specified, the browser automatically changes to

   the directory @{setting ISABELLE_BROWSER_INFO}.

   \medskip The @{verbatim "-c"} option causes the input file to be

   removed after use.

   The @{verbatim "-o"} option indicates batch-mode operation, with the

   output written to the indicated file; note that @{verbatim pdf}

   produces an @{verbatim eps} copy as well.

   \medskip The applet version of the browser is part of the standard

   WWW theory presentation, see the link ``theory dependencies'' within

   each session index.

 *}

 subsection {* Using the graph browser *}

 text {*

   The browser's main window, which is shown in

   \figref{fig:browserwindow}, consists of two sub-windows.  In the

   left sub-window, the directory tree is displayed. The graph itself

   is displayed in the right sub-window.

   \begin{figure}[ht]

   \includegraphics[width=\textwidth]{browser_screenshot}

   \caption{\label{fig:browserwindow} Browser main window}

   \end{figure}

 *}

 subsubsection {* The directory tree window *}

 text {*

   We describe the usage of the directory browser and the meaning of

   the different items in the browser window.

   \begin{itemize}

   \item A red arrow before a directory name indicates that the

   directory is currently ``folded'', i.e.~the nodes in this directory

   are collapsed to one single node. In the right sub-window, the names

   of nodes corresponding to folded directories are enclosed in square

   brackets and displayed in red color.

   \item A green downward arrow before a directory name indicates that

   the directory is currently ``unfolded''. It can be folded by

   clicking on the directory name.  Clicking on the name for a second

   time unfolds the directory again.  Alternatively, a directory can

   also be unfolded by clicking on the corresponding node in the right

   sub-window.

   \item Blue arrows stand before ordinary node names. When clicking on

   such a name (i.e.\ that of a theory), the graph display window

   focuses to the corresponding node. Double clicking invokes a text

   viewer window in which the contents of the theory file are

   displayed.

   \end{itemize}

 *}

 subsubsection {* The graph display window *}

 text {*

   When pointing on an ordinary node, an upward and a downward arrow is

   shown.  Initially, both of these arrows are green. Clicking on the

   upward or downward arrow collapses all predecessor or successor

   nodes, respectively. The arrow's color then changes to red,

   indicating that the predecessor or successor nodes are currently

   collapsed. The node corresponding to the collapsed nodes has the

   name ``@{verbatim "[....]"}''. To uncollapse the nodes again, simply

   click on the red arrow or on the node with the name ``@{verbatim

   "[....]"}''. Similar to the directory browser, the contents of

   theory files can be displayed by double clicking on the

   corresponding node.

 *}

 subsubsection {* The ``File'' menu *}

 text {*

   Due to Java Applet security restrictions this menu is only available

   in the full application version. The meaning of the menu items is as

   follows:

   \begin{description}

   \item[Open \dots] Open a new graph file.

   \item[Export to PostScript] Outputs the current graph in Postscript

   format, appropriately scaled to fit on one single sheet of A4 paper.

   The resulting file can be printed directly.

   \item[Export to EPS] Outputs the current graph in Encapsulated

   Postscript format. The resulting file can be included in other

   documents.

   \item[Quit] Quit the graph browser.

   \end{description}

 *}

 subsection {* Syntax of graph definition files *}

 text {*

   A graph definition file has the following syntax:

   \begin{center}\small

   \begin{tabular}{rcl}

     @{text graph} & @{text "="} & @{text "{ vertex"}~@{verbatim ";"}~@{text "}\<^sup>+"} \\

     @{text vertex} & @{text "="} & @{text "vertex_name vertex_ID dir_name ["}~@{verbatim "+"}~@{text "] path ["}~@{verbatim "<"}~@{text "|"}~@{verbatim ">"}~@{text "] { vertex_ID }\<^sup>*"}

   \end{tabular}

   \end{center}

   The meaning of the items in a vertex description is as follows:

   \begin{description}

   \item[@{text vertex_name}] The name of the vertex.

   \item[@{text vertex_ID}] The vertex identifier. Note that there may

   be several vertices with equal names, whereas identifiers must be

   unique.

   \item[@{text dir_name}] The name of the ``directory'' the vertex

   should be placed in.  A ``@{verbatim "+"}'' sign after @{text

   dir_name} indicates that the nodes in the directory are initially

   visible. Directories are initially invisible by default.

   \item[@{text path}] The path of the corresponding theory file. This

   is specified relatively to the path of the graph definition file.

   \item[List of successor/predecessor nodes] A ``@{verbatim "<"}''

   sign before the list means that successor nodes are listed, a

   ``@{verbatim ">"}'' sign means that predecessor nodes are listed. If

   neither ``@{verbatim "<"}'' nor ``@{verbatim ">"}'' is found, the

   browser assumes that successor nodes are listed.

   \end{description}

 *}

 section {* Creating Isabelle session directories

   \label{sec:tool-mkdir} *}

 text {*

   The @{tool_def mkdir} utility prepares Isabelle session source

   directories, including a sensible default setup of @{verbatim

   IsaMakefile}, @{verbatim ROOT.ML}, and a @{verbatim document}

   directory with a minimal @{verbatim root.tex} that is sufficient to

   print all theories of the session (in the order of appearance); see

   \secref{sec:tool-document} for further information on Isabelle

   document preparation.  The usage of @{verbatim isabelle} @{tool

   mkdir} is:

 \begin{ttbox}

 Usage: mkdir [OPTIONS] [LOGIC] NAME

   Options are:

     -I FILE      alternative IsaMakefile output

     -P           include parent logic target

     -b           setup build mode (session outputs heap image)

     -q           quiet mode

   Prepare session directory, including IsaMakefile and document source,

   with parent LOGIC (default ISABELLE_LOGIC=\$ISABELLE_LOGIC)

 \end{ttbox}

   The @{tool mkdir} tool is conservative in the sense that any

   existing @{verbatim IsaMakefile} etc.\ is left unchanged.  Thus it

   is safe to invoke it multiple times, although later runs may not

   have the desired effect.

   Note that @{tool mkdir} is unable to change @{verbatim IsaMakefile}

   incrementally --- manual changes are required for multiple

   sub-sessions.  On order to get an initial working session, the only

   editing needed is to add appropriate @{ML use_thy} calls to the

   generated @{verbatim ROOT.ML} file.

 *}

 subsubsection {* Options *}

 text {*

   The @{verbatim "-I"} option specifies an alternative to @{verbatim

   IsaMakefile} for dependencies.  Note that ``@{verbatim "-"}'' refers

   to \emph{stdout}, i.e.\ ``@{verbatim "-I-"}'' provides an easy way

   to peek at @{tool mkdir}'s idea of @{tool make} setup required for

   some particular of Isabelle session.

   \medskip The @{verbatim "-P"} option includes a target for the

   parent @{verbatim LOGIC} session in the generated @{verbatim

   IsaMakefile}.  The corresponding sources are assumed to be located

   within the Isabelle distribution.

   \medskip The @{verbatim "-b"} option sets up the current directory

   as the base for a new session that provides an actual logic image,

   as opposed to one that only runs several theories based on an

   existing image.  Note that in the latter case, everything except

   @{verbatim IsaMakefile} would be placed into a separate directory

   @{verbatim NAME}, rather than the current one.  See

   \secref{sec:tool-usedir} for further information on \emph{build

   mode} vs.\ \emph{example mode} of the @{tool usedir} utility.

   \medskip The @{verbatim "-q"} option enables quiet mode, suppressing

   further notes on how to proceed.

 *}

 subsubsection {* Examples *}

 text {*

   The standard setup of a single ``example session'' based on the

   default logic, with proper document generation is generated like

   this:

 \begin{ttbox}

 isabelle mkdir Foo && isabelle make

 \end{ttbox}

   \noindent The theory sources should be put into the @{verbatim Foo}

   directory, and its @{verbatim ROOT.ML} should be edited to load all

   required theories.  Invoking @{verbatim isabelle} @{tool make} again

   would run the whole session, generating browser information and the

   document automatically.  The @{verbatim IsaMakefile} is typically

   tuned manually later, e.g.\ adding source dependencies, or changing

   the options passed to @{tool usedir}.

   \medskip Large projects may demand further sessions, potentially

   with separate logic images being created.  This usually requires

   manual editing of the generated @{verbatim IsaMakefile}, which is

   meant to cover all of the sub-session directories at the same time

   (this is the deeper reasong why @{verbatim IsaMakefile} is not made

   part of the initial session directory created by @{verbatim

   isabelle} @{tool mkdir}).  See @{"file" "~~/src/HOL/IsaMakefile"} for

   a full-blown example.

 *}

 section {* Running Isabelle sessions \label{sec:tool-usedir} *}

 text {*

   The @{tool_def usedir} utility builds object-logic images, or runs

   example sessions based on existing logics. Its usage is:

 \begin{ttbox}

 Usage: usedir [OPTIONS] LOGIC NAME

   Options are:

     -C BOOL      copy existing document directory to -D PATH (default true)

     -D PATH      dump generated document sources into PATH

     -M MAX       multithreading: maximum number of worker threads (default 1)

     -P PATH      set path for remote theory browsing information

     -Q BOOL      check proofs in parallel (default true)

     -T LEVEL     multithreading: trace level (default 0)

     -V VERSION   declare alternative document VERSION

     -b           build mode (output heap image, using current dir)

     -d FORMAT    build document as FORMAT (default false)

     -f NAME      use ML file NAME (default ROOT.ML)

     -g BOOL      generate session graph image for document (default false)

     -i BOOL      generate theory browser information (default false)

     -m MODE      add print mode for output

     -p LEVEL     set level of detail for proof objects

     -r           reset session path

     -s NAME      override session NAME

     -v BOOL      be verbose (default false)

   Build object-logic or run examples. Also creates browsing

   information (HTML etc.) according to settings.

   ISABELLE_USEDIR_OPTIONS=

   HOL_USEDIR_OPTIONS=

   ML_PLATFORM=x86-linux

   ML_HOME=/usr/local/polyml-5.2.1/x86-linux

   ML_SYSTEM=polyml-5.2.1

   ML_OPTIONS=-H 500

 \end{ttbox}

   Note that the value of the @{setting_ref ISABELLE_USEDIR_OPTIONS}

   setting is implicitly prefixed to \emph{any} @{tool usedir}

   call. Since the @{verbatim IsaMakefile}s of all object-logics

   distributed with Isabelle just invoke @{tool usedir} for the real

   work, one may control compilation options globally via above

   variable. In particular, generation of \rmindex{HTML} browsing

   information and document preparation is controlled here.

   The @{setting_ref HOL_USEDIR_OPTIONS} setting is specific to the

   plain and main Isabelle/HOL images; its value is appended to

   @{setting ISABELLE_USEDIR_OPTIONS} for these particular sessions

   only.

 *}

 subsubsection {* Options *}

 text {*

   Basically, there are two different modes of operation: \emph{build

   mode} (enabled through the @{verbatim "-b"} option) and

   \emph{example mode} (default).

   Calling @{tool usedir} with @{verbatim "-b"} runs @{executable

   "isabelle-process"} with input image @{verbatim LOGIC} and output to

   @{verbatim NAME}, as provided on the command line. This will be a

   batch session, running @{verbatim ROOT.ML} from the current

   directory and then quitting.  It is assumed that @{verbatim ROOT.ML}

   contains all ML commands required to build the logic.

   In example mode, @{tool usedir} runs a read-only session of

   @{verbatim LOGIC} and automatically runs @{verbatim ROOT.ML} from

   within directory @{verbatim NAME}.  It assumes that this file

   contains appropriate ML commands to run the desired examples.

   \medskip The @{verbatim "-i"} option controls theory browser data

   generation. It may be explicitly turned on or off --- as usual, the

   last occurrence of @{verbatim "-i"} on the command line wins.

   The @{verbatim "-P"} option specifies a path (or actual URL) to be

   prefixed to any \emph{non-local} reference of existing theories.

   Thus user sessions may easily link to existing Isabelle libraries

   already present on the WWW.

   The @{verbatim "-m"} options specifies additional print modes to be

   activated temporarily while the session is processed.

   \medskip The @{verbatim "-d"} option controls document preparation.

   Valid arguments are @{verbatim false} (do not prepare any document;

   this is default), or any of @{verbatim dvi}, @{verbatim dvi.gz},

   @{verbatim ps}, @{verbatim ps.gz}, @{verbatim pdf}.  The logic

   session has to provide a properly setup @{verbatim document}

   directory.  See \secref{sec:tool-document} and

   \secref{sec:tool-latex} for more details.

   \medskip The @{verbatim "-V"} option declares alternative document

   versions, consisting of name/tags pairs (cf.\ options @{verbatim

   "-n"} and @{verbatim "-t"} of the @{tool_ref document} tool).  The

   standard document is equivalent to ``@{verbatim

   "document=theory,proof,ML"}'', which means that all theory begin/end

   commands, proof body texts, and ML code will be presented

   faithfully.  An alternative version ``@{verbatim

   "outline=/proof/ML"}'' would fold proof and ML parts, replacing the

   original text by a short place-holder.  The form ``@{text

   name}@{verbatim "=-"},'' means to remove document @{text name} from

   the list of versions to be processed.  Any number of @{verbatim

   "-V"} options may be given; later declarations have precedence over

   earlier ones.

   \medskip The @{verbatim "-g"} option produces images of the theory

   dependency graph (cf.\ \secref{sec:browse}) for inclusion in the

   generated document, both as @{verbatim session_graph.eps} and

   @{verbatim session_graph.pdf} at the same time.  To include this in

   the final {\LaTeX} document one could say @{verbatim

   "\\includegraphics{session_graph}"} in @{verbatim

   "document/root.tex"} (omitting the file-name extension enables

   {\LaTeX} to select to correct version, either for the DVI or PDF

   output path).

   \medskip The @{verbatim "-D"} option causes the generated document

   sources to be dumped at location @{verbatim PATH}; this path is

   relative to the session's main directory.  If the @{verbatim "-C"}

   option is true, this will include a copy of an existing @{verbatim

   document} directory as provided by the user.  For example,

   @{verbatim isabelle} @{tool usedir}~@{verbatim "-D generated HOL

   Foo"} produces a complete set of document sources at @{verbatim

   "Foo/generated"}.  Subsequent invocation of @{verbatim

   isabelle} @{tool document}~@{verbatim "Foo/generated"} (see also

   \secref{sec:tool-document}) will process the final result

   independently of an Isabelle job.  This decoupled mode of operation

   facilitates debugging of serious {\LaTeX} errors, for example.

   \medskip The @{verbatim "-p"} option determines the level of detail

   for internal proof objects, see also the \emph{Isabelle Reference

   Manual}~\cite{isabelle-ref}.

   \medskip The @{verbatim "-v"} option causes additional information

   to be printed while running the session, notably the location of

   prepared documents.

   \medskip The @{verbatim "-M"} option specifies the maximum number of

   parallel threads used for processing independent tasks when checking

   theory sources (multithreading only works on suitable ML platforms).

   The special value of @{verbatim 0} or @{verbatim max} refers to the

   number of actual CPU cores of the underlying machine, which is a

   good starting point for optimal performance tuning.  The @{verbatim

   "-T"} option determines the level of detail in tracing output

   concerning the internal locking and scheduling in multithreaded

   operation.  This may be helpful in isolating performance

   bottle-necks, e.g.\ due to excessive wait states when locking

   critical code sections.

   \medskip The @{verbatim "-Q"} option tells whether individual proofs

   should be checked in parallel; the default is @{verbatim true}.

   Note that fine-grained proof parallelism requires considerable

   amounts of extra memory, since full proof context information is

   maintained for each independent derivation thread, until checking is

   completed.

   \medskip Any @{tool usedir} session is named by some \emph{session

   identifier}. These accumulate, documenting the way sessions depend

   on others. For example, consider @{verbatim "Pure/FOL/ex"}, which

   refers to the examples of FOL, which in turn is built upon Pure.

   The current session's identifier is by default just the base name of

   the @{verbatim LOGIC} argument (in build mode), or of the @{verbatim

   NAME} argument (in example mode). This may be overridden explicitly

   via the @{verbatim "-s"} option.

 *}

 subsubsection {* Examples *}

 text {*

   Refer to the @{verbatim IsaMakefile}s of the Isabelle distribution's

   object-logics as a model for your own developments.  For example,

   see @{"file" "~~/src/FOL/IsaMakefile"}.  The Isabelle @{tool_ref

   mkdir} tool creates @{verbatim IsaMakefile}s with proper invocation

   of @{tool usedir} as well.

 *}

 section {* Preparing Isabelle session documents

   \label{sec:tool-document} *}

 text {*

   The @{tool_def document} utility prepares logic session documents,

   processing the sources both as provided by the user and generated by

   Isabelle.  Its usage is:

 \begin{ttbox}

 Usage: document [OPTIONS] [DIR]

   Options are:

     -c           cleanup -- be aggressive in removing old stuff

     -n NAME      specify document name (default 'document')

     -o FORMAT    specify output format: dvi (default), dvi.gz, ps,

                  ps.gz, pdf

     -t TAGS      specify tagged region markup

   Prepare the theory session document in DIR (default 'document')

   producing the specified output format.

 \end{ttbox}

   This tool is usually run automatically as part of the corresponding

   Isabelle batch process, provided document preparation has been

   enabled (cf.\ the @{verbatim "-d"} option of the @{tool_ref usedir}

   tool).  It may be manually invoked on the generated browser

   information document output as well, e.g.\ in case of errors

   encountered in the batch run.

   \medskip The @{verbatim "-c"} option tells the @{tool document} tool

   to dispose the document sources after successful operation.  This is

   the right thing to do for sources generated by an Isabelle process,

   but take care of your files in manual document preparation!

   \medskip The @{verbatim "-n"} and @{verbatim "-o"} option specify

   the final output file name and format, the default is ``@{verbatim

   document.dvi}''.  Note that the result will appear in the parent of

   the target @{verbatim DIR}.

   \medskip The @{verbatim "-t"} option tells {\LaTeX} how to interpret

   tagged Isabelle command regions.  Tags are specified as a comma

   separated list of modifier/name pairs: ``@{verbatim "+"}@{text

   foo}'' (or just ``@{text foo}'') means to keep, ``@{verbatim

   "-"}@{text foo}'' to drop, and ``@{verbatim "/"}@{text foo}'' to

   fold text tagged as @{text foo}.  The builtin default is equivalent

   to the tag specification ``@{verbatim

   "+theory,+proof,+ML,+visible,-invisible"}''; see also the {\LaTeX}

   macros @{verbatim "\\isakeeptag"}, @{verbatim "\\isadroptag"}, and

   @{verbatim "\\isafoldtag"}, in @{"file"

   "~~/lib/texinputs/isabelle.sty"}.

   \medskip Document preparation requires a properly setup ``@{verbatim

   document}'' directory within the logic session sources.  This

   directory is supposed to contain all the files needed to produce the

   final document --- apart from the actual theories which are

   generated by Isabelle.

   \medskip For most practical purposes, the @{tool document} tool is

   smart enough to create any of the specified output formats, taking

   @{verbatim root.tex} supplied by the user as a starting point.  This

   even includes multiple runs of {\LaTeX} to accommodate references

   and bibliographies (the latter assumes @{verbatim root.bib} within

   the same directory).

   In more complex situations, a separate @{verbatim IsaMakefile} for

   the document sources may be given instead.  This should provide

   targets for any admissible document format; these have to produce

   corresponding output files named after @{verbatim root} as well,

   e.g.\ @{verbatim root.dvi} for target format @{verbatim dvi}.

   \medskip When running the session, Isabelle copies the original

   @{verbatim document} directory into its proper place within

   @{setting ISABELLE_BROWSER_INFO} according to the session path.

   Then, for any processed theory @{text A} some {\LaTeX} source is

   generated and put there as @{text A}@{verbatim ".tex"}.

   Furthermore, a list of all generated theory files is put into

   @{verbatim session.tex}.  Typically, the root {\LaTeX} file provided

   by the user would include @{verbatim session.tex} to get a document

   containing all the theories.

   The {\LaTeX} versions of the theories require some macros defined in

   @{"file" "~~/lib/texinputs/isabelle.sty"}.  Doing @{verbatim

   "\\usepackage{isabelle}"} in @{verbatim root.tex} should be fine;

   the underlying Isabelle @{tool latex} tool already includes an

   appropriate path specification for {\TeX} inputs.

   If the text contains any references to Isabelle symbols (such as

   @{verbatim "\\"}@{verbatim "<forall>"}) then @{verbatim

   "isabellesym.sty"} should be included as well.  This package

   contains a standard set of {\LaTeX} macro definitions @{verbatim

   "\\isasym"}@{text foo} corresponding to @{verbatim "\\"}@{verbatim

   "<"}@{text foo}@{verbatim ">"}, see \cite{isabelle-implementation} for a

   complete list of predefined Isabelle symbols.  Users may invent

   further symbols as well, just by providing {\LaTeX} macros in a

   similar fashion as in @{"file" "~~/lib/texinputs/isabellesym.sty"} of

   the distribution.

   For proper setup of DVI and PDF documents (with hyperlinks and

   bookmarks), we recommend to include @{"file"

   "~~/lib/texinputs/pdfsetup.sty"} as well.

   \medskip As a final step of document preparation within Isabelle,

   @{verbatim isabelle} @{tool document}~@{verbatim "-c"} is run on the

   resulting @{verbatim document} directory.  Thus the actual output

   document is built and installed in its proper place (as linked by

   the session's @{verbatim index.html} if option @{verbatim "-i"} of

   @{tool_ref usedir} has been enabled, cf.\ \secref{sec:info}).  The

   generated sources are deleted after successful run of {\LaTeX} and

   friends.  Note that a separate copy of the sources may be retained

   by passing an option @{verbatim "-D"} to the @{tool usedir} utility

   when running the session.

 *}

 section {* Running {\LaTeX} within the Isabelle environment

   \label{sec:tool-latex} *}

 text {*

   The @{tool_def latex} utility provides the basic interface for

   Isabelle document preparation.  Its usage is:

 \begin{ttbox}

 Usage: latex [OPTIONS] [FILE]

   Options are:

     -o FORMAT    specify output format: dvi (default), dvi.gz, ps,

                  ps.gz, pdf, bbl, idx, sty, syms

   Run LaTeX (and related tools) on FILE (default root.tex),

   producing the specified output format.

 \end{ttbox}

   Appropriate {\LaTeX}-related programs are run on the input file,

   according to the given output format: @{executable latex},

   @{executable pdflatex}, @{executable dvips}, @{executable bibtex}

   (for @{verbatim bbl}), and @{executable makeindex} (for @{verbatim

   idx}).  The actual commands are determined from the settings

   environment (@{setting ISABELLE_LATEX} etc.).

   The @{verbatim sty} output format causes the Isabelle style files to

   be updated from the distribution.  This is useful in special

   situations where the document sources are to be processed another

   time by separate tools (cf.\ option @{verbatim "-D"} of the @{tool

   usedir} utility).

   The @{verbatim syms} output is for internal use; it generates lists

   of symbols that are available without loading additional {\LaTeX}

   packages.

 *}

 subsubsection {* Examples *}

 text {*

   Invoking @{verbatim isabelle} @{tool latex} by hand may be

   occasionally useful when debugging failed attempts of the automatic

   document preparation stage of batch-mode Isabelle.  The abortive

   process leaves the sources at a certain place within @{setting

   ISABELLE_BROWSER_INFO}, see the runtime error message for details.

   This enables users to inspect {\LaTeX} runs in further detail, e.g.\

   like this:

 \begin{ttbox}

   cd ~/.isabelle/browser_info/HOL/Test/document

   isabelle latex -o pdf

 \end{ttbox}

 *}

 end